The End of a Dream

This morning, as I slowly eased Miranda into a parking spot at Home Depot and then shortly thereafter began to rip apart the back room, I realised that a lifetime's worth of dreaming had come to an end. For better or for worse, I have begun to live my dream. And, thus, the dream is now reality. What will I dream of now?

*pauses*

So, I made it to Home Depot this morning. I decided to forgo the backup monitor installation and leave it for next weekend. I'll be taking Miranda for her first overnight expedition and that will be a nice project to undertake then.

Step 1: Get the mattresses out of there



Step 2: Dismantle the right-side box



After taking apart that box on the right side, I decided that I didn't want to muck around with the left-side box as glue is involved. So, carpet removal and floor installation would have to go around it.

Step 3: Carefully remove any trim so that I might be able to reuse it.
Step 3A: Find money!




Step 4: Marvel that the coach has wooden floors. Which explains why it cost twice what the mobile house cost.



Step 5: Find cardboard. Blink.



Step 6: Check to see if the room is square. It is. Blink.



Step 7: Install flooring. Takes about an hour and a half once you figure out the best way to lay it out.
Step 7A: Waste only one piece because you can't measure.
Step 7B: Pat yourself on the back.



This is Allure flooring in 'chocolate', available exclusively at Home Depot. It is a combination of floating floor and peel 'n stick tiles. You get a strip of three 1'x1' vinyl tiles (so the strip is 1'x3') with sticky tabs that interlock. It's quite easy to work with, although getting tight joints is tough. I'd give my results a 9 out of 10. To cut, just score deeply with a utility knife, bend, and snap (like drywall, only tougher). So, it's a really easy product to work with and produces results very quickly.

Step 8: Reinstall the trim you saved and the little threshold thingie that creates a joint between the hardwood and the vinyl.



Don't they look nice together?!

Left to do in this room is to rip out the carpet on the upper portion of the floor and then finish up the trim. I wanted to wait until the desk was in before doing the final touch ups. Plus, by the time the floor was in it was 3:30 and I was exhausted!

Tomorrow, I'm going back there to look for desk materials so I can finish up this project. I stopped off at Ikea on the way home (literally on the way) and was reminded that I hate to shop there. So, hopefully the Home Depot will have the necessary materials to build a nice desk area.

I stacked the two mattresses on the left side and discovered that the 'sofa' is going to be pretty high up off the floor. I'll live with it that way since I don't want to get rid of the second mattress at this time.

Finally, the right-side headboard is going to be such a nightmare to remove that I think it's going to stay. I just had an idea of how to incorporate it into the desk design--it'll make a perfect push pin board!

Today's mileage: Another 30km!